Skip to content

Researched from published specs and owner reviews, not tested in person. As an Amazon Associate we earn from qualifying purchases.

Backyard Gear Calc
Menu

Chainsaws and Wood

Chainsaw Bar Length Chart: Bar Size by Wood Diameter

Last updated Researched from specs, manuals and owner reviews, not tested in person

Quick answer

Choose a bar about 2 inches longer than the wood you cut most. Wood up to 12 inches suits a 14 inch bar, 16 inch rounds suit an 18 inch bar, and 18 inch logs need a 20 inch bar with a 50 to 60 cc engine. Longer bars are heavier and harder to control.

Bar length is the usable cutting length of the guide bar, measured from the front of the saw body to the tip. A bar a little longer than your wood lets you cut through in one pass without burying the tip, which is where kickback starts.

Match the wood you cut most often, not the largest log you might ever meet. The chainsaw bar length calculator adds your experience level and job type. Our top pick for firewood is the Husqvarna 450 Rancher at $354.99.

Run the numbers first Chainsaw bar length calculator Enter the wood you cut, your largest occasional piece and your experience for a bar length. Open
On this page
  1. What bar length do I need for my wood?
  2. What size chainsaw do I need for each job?
  3. How do bar length and power go together?
  4. Is a battery chainsaw powerful enough?
  5. How do I find the right replacement chain?
  6. Which saws and safety gear should I buy?

What bar length do I need for my wood?

Bar length by wood diameter
Typical wood diameterBar lengthPower classCatalog saws with that bar
4 to 8 in10 to 12 inBattery 20V to 56V, or a 30 to 40 cc gas sawCraftsman CMCCS630P1
10 in12 inBattery 20V to 56V, or a 30 to 40 cc gas sawCraftsman CMCCS630P1
12 in14 inBattery 40V to 56V, or a 30 to 40 cc gas sawCommon size, no 14 in saw in our catalog
14 in16 inBattery 56V to 80V, or a 40 to 50 cc gas sawEGO CS1613, Husqvarna 120 Mark III
16 in18 inBattery 56V to 80V, or a 40 to 50 cc gas sawEGO CS1815, ECHO CS-4510
18 in20 in50 to 60 cc gas sawHusqvarna 450 Rancher, ECHO CS-590
22 in and up24 in or longer60 cc or larger professional sawProfessional and arborist saws

Rule of thumb: bar about 2 inches longer than the wood. Experienced users can cut larger wood from two sides, but that is slower and raises kickback exposure.

What size chainsaw do I need for each job?

Bar length by job
JobBar lengthNotes
Pruning and limbing10 to 14 inLight and maneuverable; a pole saw is safer for overhead limbs
Storm cleanup, small trees14 to 16 inBattery saws handle most yard cleanup well
Firewood, 8 to 16 in rounds16 to 20 inThe homeowner firewood sweet spot
Felling trees up to about 18 in18 to 20 inOnly with training and a clear escape path
Large hardwood, 20 in and up24 in or longerProfessional saws and arborist work

How do bar length and power go together?

Catalog saws by bar and power
SawBar (in)PowerType
Craftsman CMCCS630P11220V batteryCordless
EGO CS16131656V batteryCordless
Husqvarna 120 Mark III1638 ccGas
Milwaukee 2727-21HD1618V batteryCordless
EGO CS18151856V batteryCordless
Greenworks 80V 18 in1880V batteryCordless
Husqvarna 4401840 ccGas
ECHO CS-45101845 ccGas
Husqvarna 450 Rancher2050.2 ccGas
Husqvarna 455 Rancher2055 ccGas
ECHO CS-590 Timber Wolf2059.8 ccGas

A longer bar carries more chain through the cut, so it needs more engine or battery power to hold chain speed. Only use bar lengths the saw maker lists as compatible.

Is a battery chainsaw powerful enough?

For most homeowners, yes. Current 56V and 80V saws with 16 to 18 inch bars, such as the EGO CS1815 and the Greenworks 80V 18 inch kit, cut storm limbs, small trees and firewood rounds to about 14 to 16 inches, start instantly and need no fuel mix.

The limits are runtime on large hardwood and sustained all-day cutting, where gas saws such as the Husqvarna 450 Rancher at 50.2 cc still lead. If you cut more than a couple of cords a year, gas is still the practical answer. See the best battery chainsaws and gas vs battery chainsaw.

How do I find the right replacement chain?

A chain is identified by three numbers that must all match your bar and saw: pitch, the spacing of the links, such as 3/8 inch low profile or .325 inch; gauge, the thickness of the drive links, such as .043, .050 or .058 inch; and the number of drive links. Most bars have the pitch and gauge stamped near the mount, and the manual lists the correct chain.

Two chains for the same bar length can have different drive link counts, so never buy by bar length alone. Keep chains sharp, because a dull chain bounces, burns the wood and kicks back more readily: a guided sharpener such as the Oregon Sure Sharp or a field sharpening kit keeps the cutting geometry consistent.

Which saws and safety gear should I buy?

Bar length is only half the purchase. Chaps and a helmet are not optional, and they cost a fraction of the saw. Full picks are in chainsaw safety gear.

How we chose

We did not test these products in person. Picks are researched from manufacturer specifications and owner manuals, engine and safety certifications where they apply, warranty terms, public recall records, and the recurring themes in verified owner reviews. We favor established brands with large review counts and parts support, match each pick to a real yard size or task, and place it in the tier where its price and capability actually belong.

Frequently asked questions

What size chainsaw do I need for firewood?

For typical firewood rounds of 8 to 16 inches, an 18 inch bar is the most common homeowner choice, paired with a 40 to 50 cc gas engine or a 56V to 80V battery saw. If you regularly cut hardwood logs up to 18 inches, step up to a 20 inch bar on a 50 to 60 cc saw. Match the wood you cut most, not the biggest log you might see.

Can I cut a tree bigger than my chainsaw bar?

Experienced users can cut wood up to about twice the bar length by working from both sides, but it is slower and raises the chance of pinching and kickback. For felling, leaning or storm-damaged trees near that size the risk climbs sharply. If the wood is much larger than your bar, use a longer saw or hire a certified arborist rather than pushing a small saw.

Is a 16 inch or 18 inch chainsaw better?

A 16 inch saw is lighter and easier to handle for limbing, pruning and storm cleanup on wood up to about 14 inches. An 18 inch saw cuts firewood rounds to about 16 inches in one pass and is the more versatile choice if you burn wood. Beginners doing mostly yard cleanup are usually better served by the 16 inch.

Does a longer bar need a bigger engine?

Yes. A longer bar carries more chain in the cut, which needs more power to hold chain speed and cutting efficiency. As a guide, 12 to 14 inch bars pair with 30 to 40 cc engines or smaller battery platforms, 16 to 18 inch bars with 40 to 50 cc or higher-voltage battery saws, and 20 inch bars with 50 to 60 cc engines.

What chainsaw is best for a beginner?

A 14 to 16 inch battery chainsaw is usually the best start: no fuel mixing or pull starting, lighter weight and instant stopping when you release the trigger. It handles most yard cleanup and small firewood. Take a basic chainsaw safety course, wear chaps and a helmet with a face screen, and learn kickback avoidance before cutting anything under tension.

Researched, not professional advice. This page is compiled from published specifications, manuals, labels and owner-review consensus, not hands-on testing. Follow the manufacturer's instructions and product label, and consult a qualified professional where safety, chemicals, fuel or structures are involved. As an Amazon Associate we earn from qualifying purchases.