Skip to content

Researched from published specs and owner reviews, not tested in person. As an Amazon Associate we earn from qualifying purchases.

Backyard Gear Calc
Menu

Landscaping

Gravel Weight Chart: Tons and Pounds per Cubic Yard

Last updated Researched from specs, manuals and owner reviews, not tested in person

Quick answer

A cubic yard of typical gravel weighs about 1.4 tons, or 2,800 pounds. Pea gravel and river rock run about 1.35 tons per yard, crusher run about 1.5 tons and lava rock only 0.6 tons. A 10 by 20 foot path at 3 inches needs 1.85 yards, roughly 2.6 tons.

Gravel is quoted three ways: by the cubic yard, by the ton and by the half cubic foot bag. Because weight per yard varies with the stone, converting between volume and weight is where orders go wrong, and an over-order of stone is far harder to deal with than an over-order of mulch.

Use the weight table for your material, then the coverage table for your area. The gravel calculator adds compaction allowances and bag counts.

Run the numbers first Gravel calculator Enter area, depth and material for cubic yards, tons, bags and trips to move it. Open
On this page
  1. How much does a cubic yard of gravel weigh?
  2. How much gravel do I need for my area?
  3. How deep should gravel be?
  4. How is the gravel calculation done?
  5. Can I haul gravel in a pickup truck?
  6. Do I need landscape fabric under gravel?
  7. What do I need to move and spread gravel?

How much does a cubic yard of gravel weigh?

Typical gravel weights
MaterialTons per cubic yardPounds per cubic yardPounds per cubic footHalf cubic foot bag
Pea gravel1.352,700 lb100 lb50 lb
Crushed stone, 3/4 in (#57)1.42,800 lb104 lb52 lb
Crusher run or road base1.53,000 lb111 lb56 lb
River rock1.352,700 lb100 lb50 lb
Decomposed granite1.32,600 lb96 lb48 lb
Lava rock0.61,200 lb44 lb22 lb

Typical loose bulk densities. Wet material and larger stone weigh more, so ask your supplier for the figure for their specific product before ordering by the ton.

How much gravel do I need for my area?

Gravel by area and depth, cubic yards and tons at 1.4 tons per yard
Area2 in deep3 in deep4 in deep6 in deep
100 sq ft0.62 yd, 0.9 t0.93 yd, 1.3 t1.23 yd, 1.7 t1.85 yd, 2.6 t
200 sq ft1.23 yd, 1.7 t1.85 yd, 2.6 t2.47 yd, 3.5 t3.70 yd, 5.2 t
300 sq ft1.85 yd, 2.6 t2.78 yd, 3.9 t3.70 yd, 5.2 t5.56 yd, 7.8 t
500 sq ft3.09 yd, 4.3 t4.63 yd, 6.5 t6.17 yd, 8.6 t9.26 yd, 13.0 t
1,000 sq ft6.17 yd, 8.6 t9.26 yd, 13.0 t12.35 yd, 17.3 t18.52 yd, 25.9 t

Add about 10 percent for crushed stone and 15 percent for road base and decomposed granite, which compact, plus about 5 percent for uneven ground.

How deep should gravel be?

Recommended gravel depth by project
ProjectDepthNotes
Garden path or walkway2 to 3 in pea gravel or decomposed graniteOver compacted soil and landscape fabric, with edging
Patio or fire pit area2 in top layerOver 4 in of compacted crushed base
Driveway, new4 to 6 in base plus 2 to 3 in top layerBuild in compacted lifts; a geotextile helps on soft soil
Driveway, refresh2 in top layerRake and regrade first
Drainage or French drainPer drain designWashed crushed stone wrapped in fabric
Decorative beds2 to 3 inRiver rock or lava rock over woven fabric

How is the gravel calculation done?

  • Cubic yards = area in square feet x depth in inches / 324
  • With compaction = cubic yards x (1 plus the allowance), about 10 percent for crushed stone and 15 percent for road base and decomposed granite
  • Tons = cubic yards x density, about 1.3 to 1.5 tons per yard for most gravel
  • Bags = cubic feet / 0.5 for common half cubic foot bags, so 54 bags per cubic yard

A circular area uses 3.1416 x radius x radius for square footage. For a driveway built in layers, run the numbers once for the base and once for the top, since they are usually different materials at different depths. Comparing against bed mulch instead? See the mulch coverage chart.

Can I haul gravel in a pickup truck?

Check the payload rating first. A cubic yard of gravel weighs about 2,700 to 3,000 pounds, which exceeds the payload of many half-ton pickups, so one yard is often a full load and a compact truck may only carry half a yard safely. For more than a couple of yards, delivery is usually cheaper than several trips and far easier on the truck.

On site, a 6 cubic foot wheelbarrow filled with gravel is extremely heavy, so fill it halfway. A two-wheel barrow such as the Jackson MP1010 is more stable, and a dump cart like the Gorilla Carts 1,500 lb at $389.99 is rated for heavier loads. A steel stone rake such as the Bully Tools 16 tine spreads gravel evenly, and a hand tamper compacts small base areas.

Do I need landscape fabric under gravel?

Under stone, yes. Unlike wood mulch, gravel sinks into bare soil and disappears within a couple of seasons, so a woven barrier such as DeWitt Pro-5 both keeps the stone where you put it and slows weeds. Thin spun fabric tears under stone and is a false economy.

For loose pea gravel paths, a cellular stabilizer grid like Vodaland GeoCell at $29.99 holds stones in place and stops ruts forming where people walk. Solid edging keeps gravel out of the lawn: steel edging such as Edge Right COR-TEN or no-dig plastic both work. See the best landscape edging.

What do I need to move and spread gravel?

Gravel punishes undersized equipment. Everything here is rated for the weight. Full picks are in the best yard carts and wheelbarrows.

How we chose

We did not test these products in person. Picks are researched from manufacturer specifications and owner manuals, engine and safety certifications where they apply, warranty terms, public recall records, and the recurring themes in verified owner reviews. We favor established brands with large review counts and parts support, match each pick to a real yard size or task, and place it in the tier where its price and capability actually belong.

Frequently asked questions

How many tons of gravel do I need for a driveway?

For a 12 by 50 foot driveway refreshed with 2 inches of gravel, you need about 2.2 cubic yards, roughly 3 tons. Building new with 4 inches of compacted base plus 2 inches of top stone takes about 5 to 5.5 cubic yards, around 7 to 8 tons. Order base and top layers separately and add 10 to 15 percent for compaction.

How much area does a ton of gravel cover?

A ton of typical gravel at about 1.4 tons per cubic yard is roughly 0.71 cubic yards. At 2 inches deep that covers about 115 square feet, at 3 inches about 77 square feet and at 4 inches about 58 square feet. Lighter materials such as lava rock cover far more area per ton, so always check the weight of the specific product.

How many bags of gravel equal a yard?

A cubic yard is 27 cubic feet, so it takes 54 half cubic foot bags to equal one yard, which is typically well over a ton of bagged stone. For anything more than about a quarter to half a yard, bulk delivery is usually far cheaper per yard than bags even after the delivery fee, and it is much less carrying.

What is the best gravel for a walkway?

Pea gravel is comfortable underfoot and drains well but shifts, so it works best with edging and a stabilizer grid. Decomposed granite or fine crushed stone with dust compacts into a firmer surface that is easier for wheelbarrows, walkers and canes. Angular crushed stone locks together better than rounded stone. Use 2 to 3 inches over compacted soil and fabric.

Should gravel be compacted?

Base layers for driveways, patios and paver bases should be compacted in lifts of about 2 to 4 inches with a plate compactor or hand tamper. Angular crushed stone and road base compact well. Rounded pea gravel and river rock do not compact meaningfully and are used as loose top layers, so plan the extra material allowance only on the base.

Researched, not professional advice. This page is compiled from published specifications, manuals, labels and owner-review consensus, not hands-on testing. Follow the manufacturer's instructions and product label, and consult a qualified professional where safety, chemicals, fuel or structures are involved. As an Amazon Associate we earn from qualifying purchases.