Skip to content

Researched from published specs and owner reviews, not tested in person. As an Amazon Associate we earn from qualifying purchases.

Backyard Gear Calc
Menu

Sheds and Storage

Suncast Tremont 8x10 Review: 547 Cu Ft Resin Shed, Pros and Cons

Last updated Researched from specs, manuals and owner reviews, not tested in person

Quick answer

Buy the Suncast Tremont 8 x 10 if you want a low-maintenance shed with a floor included for a push mower, bikes and patio furniture: 547 cubic feet of steel-reinforced resin with six skylights. Skip it if you need to store a riding mower or lawn tractor until you confirm the door opening, which the listing does not state.

The Suncast Tremont 8 x 10 ft. Resin Storage Shed ($1,599.00) is a barn-style resin shed kit with 547 cubic feet of walk-in space, steel-reinforced resin panels, six skylights, large door windows, built-in vents, lockable double doors and a floor included. Suncast ships it with pre-cut, labeled parts for minimal-tool assembly and says the resin resists fading, rust and rot with no painting or sealing.

This research review draws on Suncast's published product information, the listing and owner-review themes, not our own use. Before you pick a size, run your equipment through the shed size calculator, and if you are still choosing a material, read resin vs metal shed.

On this page
  1. Suncast Tremont 8 x 10 ft. Resin Storage Shed specs
  2. What is the Suncast Tremont 8x10 best at?
  3. What is the biggest drawback of the Suncast Tremont 8x10?
  4. How does 547 cubic feet compare with other sheds?
  5. What do owners commonly report?
  6. Who should buy the Suncast Tremont 8x10, and who should skip it?
  7. How does it compare with the alternatives?
  8. What about warranty, ratings and recalls?
  9. Alternatives to the Suncast Tremont 8 x 10 ft. Resin Storage Shed

Suncast Tremont 8 x 10 ft. Resin Storage Shed specs

SpecValue
Width8 ft
Depth10 ft
Materialresin, steel reinforced
Floor includedYes
Storage volume547 cu ft (per Suncast)
WallsSteel-reinforced resin panels
Light and airSix skylights, large door windows and vents
DoorsLockable double doors
StyleBarn style
AssemblyPre-cut, labeled parts with minimal-tool setup
Door opening, snow load, wind rating, warrantyNot stated on the listing; confirm with Suncast

Specs from Suncast's published product information and the product listing.

What is the Suncast Tremont 8x10 best at?

A resin shed is built from molded plastic panels, usually reinforced with steel, instead of wood or sheet metal. The Tremont 8 x 10 is best at giving a typical suburban yard a bright, weatherproof storage building that needs no painting and comes with its own floor.

  • Volume for the footprint. 547 cubic feet on a nominal 80 square foot footprint works out to an average of about 6.8 feet of usable height, more than many sheds this size, which helps with shelving and tall tools.
  • Floor included. You still need a level base, but you do not buy or build a separate floor.
  • Daylight. Six skylights plus door windows light the interior without wiring.
  • Low upkeep. Suncast says the resin resists fading, rust and rot, with no painting or sealing.
  • Security and airflow. Lockable double doors and built-in vents reduce musty air and moisture.

It suits bikes, a push mower, garden tools and cushions or patio furniture stored over winter. See shed size for bikes and yard equipment and shed size for patio furniture.

What is the biggest drawback of the Suncast Tremont 8x10?

The biggest drawback is what the listing leaves out. The title lists riding mowers, motorcycles, tractors and golf carts among the things it can store, but the listing does not give the door opening width, interior dimensions, snow load, wind rating or warranty. A riding mower only fits if its overall width, deck included, clears the door frame and it can turn inside, so measure your machine and get the door dimension from Suncast before you believe the title. For a lawn tractor, the longer Suncast Tremont 8 x 13 is sized for the job.

The second drawback is price against its direct rival. The Lifetime 8 x 10 shed ($1,478.85) offers the same nominal footprint with dual-wall HDPE panels, steel trusses and an HDPE floor. Resin sheds of this size also demand a truly level, square base, and a few degrees of error shows up as doors that will not close.

How does 547 cubic feet compare with other sheds?

Listed storage volume against nominal floor footprint
ShedNominal footprintListed volumeAverage usable height (volume / footprint)
Suncast Tremont 8 x 1080 sq ft547 cu ftAbout 6.8 ft
Suncast Tremont 8 x 13104 sq ft715 cu ftAbout 6.9 ft
Keter Factor 8 x 864 sq ft420 cu ftAbout 6.6 ft
Keter Artisan 7 x 749 sq ft292 cu ftAbout 6.0 ft
Arrow Classic 10 x 8 steel74 sq ft (listed)432 cu ftAbout 5.8 ft

Footprints are nominal kit sizes; interior floor space is smaller once wall thickness is subtracted. Volume includes space under the roof peak, which is useful for shelves and tall tools but not for floor storage.

What do owners commonly report?

These are recurring themes in published owner reviews, summarized as consensus rather than our own use. Review volume and quality vary by listing, so read them as tendencies, not guarantees.

Praise themes

  • A good-looking barn style that suits most yards.
  • Bright inside thanks to the skylights and door windows.
  • Sturdy once assembled on a level base.
  • No painting, and the floor saves building a separate platform.

Complaint themes

  • Assembly takes most of a day or longer and goes best with two people.
  • Panels and doors misalign when the base is not level and square.
  • Heat builds up inside in direct summer sun.
  • Door size is smaller than some owners expected for riding equipment.

Who should buy the Suncast Tremont 8x10, and who should skip it?

Buy it if

  • You store a push mower, bikes, hand tools and seasonal patio furniture.
  • You want a floor included and no painting or sealing, ever.
  • You like a barn look with natural light inside.
  • You can prepare a level, square base before the kit arrives.

Skip it if

How does it compare with the alternatives?

Suncast Tremont 8 x 10Lifetime 8 x 10Suncast Tremont 8 x 13
Price$1,599.00$1,478.85$2,299.99
Nominal footprint8 x 10 ft8 x 10 ft8 x 13 ft
WallsSteel-reinforced resinDual-wall HDPE with steel supportsSteel-reinforced resin
Floor includedYesYes, HDPEYes
Listed volume547 cu ftNot stated715 cu ft
SkylightsSixExtra-wide roof skylightEight
Shelving (per listing)Not statedHeight-adjustable shelfFour adjustable corner shelves
Best fitBikes, push mower, furniturePush mower and hand toolsLawn tractor or golf cart

What about warranty, ratings and recalls?

Warranty: the listing does not state a warranty term. Suncast publishes limited warranties by product line, so confirm the Tremont 8 x 10 coverage and whether it requires the recommended foundation and anchoring.

Snow and wind ratings: the listing publishes no roof snow load or wind rating. Do not assume one. In snowy areas, clear heavy snow from the roof with a soft roof rake, and anchor the shed as the manual directs.

Recalls: check the CPSC recall database at cpsc.gov/Recalls for this model before you buy, and again once a year after you own it. Search by brand and model number, and register the product with the manufacturer so a recall notice reaches you directly.

Alternatives to the Suncast Tremont 8 x 10 ft. Resin Storage Shed

How we chose

We did not test these products in person. Picks are researched from manufacturer specifications and owner manuals, engine and safety certifications where they apply, warranty terms, public recall records, and the recurring themes in verified owner reviews. We favor established brands with large review counts and parts support, match each pick to a real yard size or task, and place it in the tier where its price and capability actually belong.

Sources

  • Suncast Tremont 8 x 10 assembly manual and product information
  • Amazon product listing and feature specifications
  • CPSC recall database
  • Owner review themes from verified Amazon purchasers

Frequently asked questions

Is a resin shed better than a metal shed?

A resin shed such as the Suncast Tremont will not rust or dent, usually includes a floor and needs no painting, but it costs more per square foot. A steel shed gives more floor area for the money and resists impact from tools, but needs a separate foundation and careful anchoring. Our resin vs metal shed comparison covers durability, heat and cost.

Will a riding mower fit in a Suncast Tremont 8 x 10?

Possibly, but the listing does not state the door opening width, so you cannot confirm it from the listing alone. Measure your mower's overall width with the deck and chute, then get the Tremont's door dimension from Suncast. You also need room to drive in and walk around it. Our shed size for a riding mower page gives footprint guidance.

What foundation does a Suncast Tremont 8 x 10 need?

Even with the floor included, the shed needs a level, square base larger than its footprint, such as a concrete slab, a compacted gravel pad with a timber frame, or a pressure-treated wood platform, following Suncast's manual. An uneven base is the most common cause of doors that bind and panels that will not align. Check local permit and setback rules before building the base.

Suncast Tremont or Lifetime 8 x 10: which shed should I buy?

Both have a nominal 8 by 10 foot footprint and include a floor. The Suncast Tremont lists 547 cubic feet, six skylights and door windows in a barn style. The Lifetime 8 x 10 lists dual-wall HDPE panels with steel trusses, an HDPE floor and doors with two interior deadbolts. Compare current prices and the style you prefer.

Researched, not professional advice. This page is compiled from published specifications, manuals, labels and owner-review consensus, not hands-on testing. Follow the manufacturer's instructions and product label, and consult a qualified professional where safety, chemicals, fuel or structures are involved. As an Amazon Associate we earn from qualifying purchases.